ProAVmag

DSP Control System: Architectural Acoustics Prolinx DX DSP Control System

The Prolinx DX programmable DSP audio processing, routing, and control system from Architectural Acoustics, a division of Peavey, can operate as a self-contained system at 12x12 I/O. Built on 32-bit 10/18/2007 9:02 PM Eastern

DSP Control System: Architectural Acoustics Prolinx DX DSP Control System

The Prolinx DX programmable DSP audio processing, routing, and control system from Architectural Acoustics, a division of Peavey, can operate as a self-contained system at 12x12 I/O. Built on 32-bit parallel SHARC processors, the Prolinx DX has a total of 1,320 MIPS allocated to input and output processing, and an additional 400 MIPS of processing reserved for signal generation, frequency analysis, and general communications.

The Prolinx DX programmable DSP audio processing, routing, and control system from Architectural Acoustics, a division of Peavey, can operate as a self-contained system at 12x12 I/O. Built on 32-bit parallel SHARC processors, the Prolinx DX has a total of 1,320 MIPS allocated to input and output processing, and an additional 400 MIPS of processing reserved for signal generation, frequency analysis, and general communications. The unit is configurable from the front panel using its built-in, high-resolution LCD display and controls. Features include room combining, true automixing, wired or wireless networking, graphic EQ at each output, and 12 mic/line inputs with 48-volt phantom power. The 2RU chassis includes a quarter-VGA LCD front-panel display with programmable I/O indicator switches. Price: N/A. For more information, contact Architectural Acoustics at 601-483-5376 or at http://aa.peavey.com.



Want to read more stories like this?
Get our Free Newsletter Here!
Past Issues
June 2015

May 2015

April 2015

March 2015

February 2015

January 2015

December 2014

November 2014