ProAVmag

Transmitter and Receiver: Kramer Electronics TP-45 and TP-46

Kramer Electronics recently added two new products to its twisted pair line of long distance audio/video products. 8/06/2007 1:22 AM Eastern

Transmitter and Receiver: Kramer Electronics TP-45 and TP-46

Kramer Electronics recently added two new products to its twisted pair line of long distance audio/video products.

Kramer Electronics recently added two new products to its twisted pair line of long distance audio/video products. The TP-45 transmitter and TP-46 receiver simplify the routing of either computer graphics video or component video, along with either unbalanced analog stereo audio or S/PDIF digital audio signals over UTP CAT-5 cable. According to the company, this pair is ideal in a home cinema application for HDTV component video signals or in a professional application where computer graphics video and/or component video signals are being used in long-range distribution systems. The TP-45 transmitter accepts a computer graphics video signal on a 15-pin HD connector with resolutions up to UXGA and a component video signal (Y, Cb/Pb, Cr/Pr) on three RCA connectors with resolutions up to 1080p. The TP-45 also accepts an unbalanced analog stereo audio signal on a 3.5mm mini jack connector and an S/PDIF digital audio signal on an RCA connector. The audio signal on the TP-46 is distributed simultaneously to the analog and digital audio outputs. The TP-45 converts the signal for transmission over a standard UTP CAT-5 type twisted pair cable up to 330 feet, where it is transformed back into its original audio and video signal formats by the TP-46. For more information, contact Kramer Electronics at 888-275-6311 or at www.kramerus.com.

 


Want to read more stories like this?
Get our Free Newsletter Here!
Past Issues
July 2015

June 2015

May 2015

April 2015

March 2015

February 2015

January 2015

December 2014