Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Radial Engineering Tossover Variable Frequency Divider

The Tossover is a 500 series module that enables you to divide the frequency bands of an audio signal.

Radial Engineering Tossover Variable Frequency Divider

Jan 21, 2013 4:44 PM

Radial Engineering Tossover

Radial Engineering has introduced the Tossover, a 500 series module that enables you to divide the frequency bands of an audio signal to separately process lows and highs or combine the two in series to create a band-pass filter. The front panel sports two sets of controls: one set is focused on the mid and high frequencies, while the other separates the mid and bass frequencies so that each can be processed individually. The frequency knob lets you adjust the cut-off point and the amplitude knob is used to adjust the signal level. To intensify the effect, each frequency divider is equipped with a three-position filter that may be set with a 12dB, 18dB, or 24dB per octave slope. This enables the Tossover to also work double duty as an elaborate filter to either warm up tracks or reduce unwanted resonance. A miniature slider switch near the card edge connector allows the user to toggle the output as needed. Availability: Now Price: $400

Featured Articles

Close