Markets

Tripp Lite Hot-Swap

Tripp Lite has introduced a line of Hot-Swap power distribution units (PDUs) 7/18/2010 12:21 PM Eastern

Tripp Lite Hot-Swap

Jul 18, 2010 4:21 PM




Tripp Lite Hot-Swap

Tripp Lite has introduced a line of Hot-Swap power distribution units (PDUs). These new PDUs make it possible to remove standard plug-in UPS systems for maintenance or replacement without interrupting power to the connected load. The Hot-Swap PDUs feature dual-input power cables that connect both to the UPS and directly to the primary power source. During normal operation, the PDU supplies conditioned power from the UPS to connected equipment. A manual transfer switch enables the load to be shifted from the UPS to direct primary power. The UPS may then be powered down and removed from service while connected mission-critical equipment remains powered and operational. Features include the ability to remove, replace, or repair standard UPS systems without powering down a mission-critical connected load; dual-power input cables and manual transfer switch with lighted status indicators; and 2RU installation in two- or four-post racks with support for space-saving rear-post mounting. Price: NA

Read more about this product at The Briefing Room

 Related Links

Tripp Lite Introduces New 3- and 4-Port Compact IP Console Servers


Events/Training more →
Past Issues
January 2015

February 2015

December 2014

November 2014

October 2014

August 2014

July 2014

June 2014