Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


dB Technologies introduces new Theater Series stage monitors

Italian loudspeaker manufacturer dB Technologies presents their new high performance TH theater series stage monitors. The initial introduction include the DVX-DM12 TH and DVX-DM15 TH active two-way stage monitors. High output – 136 dB max SPL. Featuring either 12” or 15” neodymium woofers with 4” voice coil coupled with 1.4” exit HF neo compression driver with 2.5” voice coil. The cabinets feature rotatable HF driver (for left or right configuration), double EQ preset, input and output panels onA either side and universal switch mode power supply. Frequency response on the DVX-DM12 TH is 63Hz-16 kHz and on the DVX-DM15 TH is 55Hz-16 kHz (+/-6 dB).

Let’s take a closer look:

A unique feature of the TH series monitors is the ability to rotate the front panel to configure the monitor with the horn on the right or on the left for stage positioning and stereo configuration purposes. In addition, the 90×40 horn can be rotated for proper pattern coverage.

Utilizing the latest in amplifier technology from dB Technologies, the TH series incorporates a two-way Digipro G2 amplifier which splits the power delivering 750-watts RMS to the low frequency section and 375-watts RMS to the high frequency section. Conceived to operate in full-range mode, thanks to the SMPS (Switched-Mode Power Supplies) and PFC (Power Factor Correction) technologies assure operation with supply voltages between 100 Vac and 240 Vac, ensuring the same performance even with floating and non-stabilized power supply.

The linear response and accurate frequency response allow the TH series to be used on stages large or small, wherever high levels of performance are required. A selector located on the input panel allows to choose between two preset equalizations – EQ FLAT and TH EQ.

The monitor cabinets are constructed of heavy-duty 15-mm multi-layer birch, painted with a black polyurea for ruggedness and roadworthiness. All inputs (Powercon and XLR input) are located at one end with the links (Powercon and XLR output) at the opposite end for ease of pass-through connectivity. The input section also includes LED indicators monitoring the internal limiter circuit, amplifier status, power voltage, input sensitivity and audio signal presence. Two recessed side handles facilitate transport.

For additional information and technical specifications on these products, please find those on the following links:



Featured Articles