Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


Extron Now Shipping 3G-SDI Wallplate Transmitters for DTP Systems

Anaheim, California (July 1, 2015) – Extron Electronics is pleased to announce the immediate availability of the DTP T 3G-SDI 230 D and DTP T 3G-SDI 330 D, single-gang Decora®-style transmitters for sending 3G-SDI, HD-SDI, or SDI, audio, and bidirectional RS-232 and IR signals over a shielded CATx cable to Extron DTP-enabled products. The DTP T 3G-SDI 230 D extends signals up to 230 feet (70 meters), while the DTP T 3G-SDI 330 D extends signals up to 330 feet (100 meters). Both DTP T 3G-SDI D models feature built-in signal conversion for full compatibility with all DTP 230 and DTP 330 Series receivers, and DTP-enabled products. They provide seamless integration of broadcast-type video signals into DTP Systems, supporting video rates up to 2.97 Gbps. The transmitters accept analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. They also offer many integrator-friendly features such as an input loop-through, remote power capability, and bidirectional RS-232 and IR pass-through for remote AV device control. The space-efficient, wall-mountable design provides the convenience of placing input connections precisely where they are needed.

“The addition of these new twisted pair transmitters to the DTP lineup provides integrators and system designers with an efficient way to interface broadcast-type SDI sources, such as PTZ cameras, with professional or consumer-level AV equipment in DTP Systems,” says Casey Hall, Vice President of Sales and Marketing for Extron. “They convert and send source signals from the convenience of a wall, floor, or lectern, in a wide range of AV applications.”

The DTP T 3G-SDI 230 D and DTP T 3G-SDI 330 D offer several features that enhance and simplify AV system integration, including input equalization and reclocking on the SDI input loop-through. Input equalization conditions incoming 3G-SDI signals to compensate for signal loss over long input cables, while reclocking removes data timing jitter. For increased system design flexibility, the transmitters can transmit a selected pair of AES audio channels as embedded digital audio, or send analog stereo audio alongside the video and control signals. To streamline installation, the transmitters can be remotely powered by Extron DTP-enabled products over the twisted pair cable. They also offer an HDBaseT output mode that is compatible with any HDBaseT-enabled display. The DTP T 3G-SDI 230 D and DTP T 3G-SDI 330 D mount in an included Decora-style wallplate designed for installation in one-gang US wall boxes.

To watch a product introduction video, please visit:

For more information on the DTP T 3G-SDI D Series, please visit:

Featured Articles