ADTECHNO Dante AV Ultra Encoder and Decoder DAV-01
The ADTECHNO Dante AV Ultra Encoder and Decoder lineup (DAV-01HT, DAV-01HR, DAV-01ST, and DAV-01SR) was developed to align with Audinate’s Dante AV Ultra standard. These devices facilitate the transmission of 8-channel audio, up to 4Kp60 4:4:4 video, USB, IR, and RS-422 serial commands over a 1GbE network. What sets them apart is the integration with the renowned Dante Controller software. They support combinations of single and dual 12G-SDI and HDMI IO, with independent routing of audio, video, USB / KVM, RS-422, and IR, as well as preview out on the encoders and simultaneous multi-channel output on the decoders. Their Pro AV-optimized Colibri codec supports 4K60; a single network clock supports sync. From the judges: “This is a very interesting niche product, creatively using the Dante AV protocol to transport audio/video/control systems over the network via IP. Smart move to also integrate with the Dante controller software. Video preview and headphone jack are an added bonus.”
This 16-channel standalone multi-codec audio HDMI converter is tailored for Dante applications to bridge HDMI 2.0 signals to 16 channels of Dante audio. It supports Dolby ATMOS, Dolby Digital, Dolby Digital Plus, Dolby True HD, Dolby Surround, and Dolby Vision (pass-through), DTS/DTS:X (including IMAX Enhanced), MPEG-4 AAC, MPEG-H, SONY 360RA, and Auro3D. The HDMI 2.0 input is compatible with devices such as media players, gaming consoles, set-top boxes, and more. From the judges: “A nice box for your AV tool kit as we see products such as this develop on the Dante AV platform. With full Dolby support, this product is very versatile.”
AtlasIED AZMP8-DW
This 1200-watt 8-zone Dante-enabled audio processor is a built-in message player, virtual wall controller, learning ambient noise sensing, Tilter Filter, auto-gain, GPIO, bell scheduler, room combining, and more, all in a unique on-wall form factor that integrates across the Atmosphere line. Intended for flexible spaces without a centralized AV room, such as banquet halls and divisible rooms in higher education facilities, its form factor allows the AZMP8-DW to be conveniently mounted on a wall and eliminates the need for a traditional equipment rack. ADA-compliant, the integrated locking cabinet includes room for peripheral devices such as a network switch or music streamer. The AZMP8-DW harnesses the power of amplifier powersharing technology; With a total power output of 1200 watts, each output channel can be software assigned anywhere between 5-600W. From the judges: “The wall-mounted cabinet form factor is elegantly executed and sets this product apart in a striking way.”
AVer TR335
This 4K60 PTZ carries a 30X optical zoom lens; it supports 3G-SDI, HDMI, USB, and IP outputs for broadcasting, streaming, and recording needs. Features include intelligent AI like Presenter Mode for dynamic speaker tracking, Zone Mode for customizable tracking zones, and Hybrid Mode Tracking for seamless auto-tracking and PTZ operations. AVer’s products have received certification for Microsoft Teams, Zoom, RingCentral, and Barco. From the judges: “AVer covers a lot of bases with this camera making it a natural choice for a variety of systems designs.”
Blaze Audio PowerZone Connect 6008
This amplifier can power both conventional low-impedance (2Ω to 16Ω) loudspeakers and constant voltage (70V/100V) transformer-coupled loudspeakers. Automatic power-sharing technology allows proportional distribution in both Lo-Z and Hi-Z modes. At 3000W it is one of two amplifiers in the Blaze range to reach this power rating. The unit incorporates Blaze Audio’s versatile DSP web app controller, PowerZone Control, and compatibility with PowerZone Control Center, a new standalone DSP controller for multi-unit system setup. The amplifier offers 8 balanced Euroblock inputs and 8 unbalanced RCA Phono inputs. It also includes S/PDIF digital audio I/O with routing that can be configured via the PowerZone Control web app, PowerZone Control Center, a configurable GPIO (General Purpose I/O), along with eight configurable loudspeaker outputs that utilize Euroblock connectors. From the judges: “A very feature-rich unit, the GPIO and stand-alone DSP features are probably at the top of the mark and the app is a very powerful tool.”
DAS Audio ARA-P28
The ARA-P28.74 is a point source system that combines technical innovation with acoustic precision. Featuring a dual 8-inch speaker configuration, this model delivers a comprehensive frequency range from 70 Hz to 17 kHz. Its rotatable horn provides a horizontal coverage of 70º and vertical coverage of 40º, the ARA-P28.74 ensures uniform sound dispersion, ideal for medium to long throw applications in various settings. From the judges: “Small form factor, big punch best describes this loudspeaker. I think this unit would work well in a variety of outdoor applications and the long throw properties of it are extremely beneficial.”
System Integrator (SI) v21 streamlines project workflows with accurate, up-to-date integrator-level pricing for 1.6 million products from 340 suppliers and 1,200 brands via the D-Tools Product Library. The v21 update was a complete streamlining of the entire workflow from initial client contact through service; it increased focus on the proposal creation module, which integrates with Visio and AutoCAD. Also new for v21: Dark Mode; Bulk Data Management checklist integration with CSV files; and Quantity-based Quoting includes line items (products, labor, and packages) by quantity. Dealers can now add files or links to products, such as spec sheets and installation manuals. Other new features include the integration with QuickBooks Time, improved product search functionality, and several time-saving enhancements to Mobile Install. From the judges: “As it reaches its 25th year in serving the industry, it’s great to see D-Tools continuing to develop and grow this product, a staple in the AV industry. This was an App before there were Apps. Congrats on version 21.”
DVIGear DisplayNetDN-300H SDVoE Tx/ Rx USB HID
This newest addition to the DisplayNet AVoIP products utilizes SDVoE ASIC technology for studio-quality AVoIP routing with fully integrated KVM. As with all DisplayNet products, it supports 4K/60 (4:4:4) video distribution. The unit supports USB HID device extension and routing with instant switching. It also offers innovative software-defined KVM functionality and multi-screen KVM support, plus hotkey routing and system control. Like the DN-300, the new DN-300H offers switchable Tx / Rx operation in an ultra-compact, low-profile form with PoE+ support, and dual (copper/fiber) network interfaces that enable signal extension distances of up to 100 meters (328 ft.) with CAT-6A twisted pair and up to 30 KM (18.6 miles) with single-mode fiber. The unit includes auxiliary H.264/5 video output streams for viewing source thumbnails and for remote viewing/ recording with resolutions up to 1080 /30p. All of the DisplayNet software, management, and API support applies. From the judges: “DVIGear continues to impress with this product for HDMI transport at a compelling price for this many features.”
ENCO Qimera
This Unreal Engine-based virtual compositing tool allows content creators to create advanced virtual sets and augmented reality graphics anywhere for live production, with or without a tracking system. The complete system with AR/VR/XR, brings virtual production technology to a very affordable price point, for corporations, universities, live event venues, houses of worship, and PEG stations that were once priced out of the market. Qimera facilitates daily use of the system without the need for a large group of seasoned virtual production experts. The Quimera server is equipped with NVIDIA’s GeForce RTX 4090 GPU to produce AI-powered, data-driven, real-time graphics with exceptional processing power. Built-in features include camera and talent tracking, DMX lighting control, PTZ camera integration, a 3D assets library, realistic graphics via Unreal Engine, multi-layer composition, calibration tools, a state-of-the-art chroma key, and a virtual jib. Users can connect four cameras into a single Qimera server via built-in video switcher. From the judges: “An effective and easy way for users to broadcast augmented and virtual reality, with an accessible, inclusive price point.”
Fasetto AUDIO Cu
AUDIO Cu enables home audio theater systems to operate over existing power lines without needing to run speaker wire from an AVR to each speaker in any room or environment. The patented solution is an alternative to an AVR and delivers synchronized, high-resolution Dolby Digital and Dolby Atmos audio data by distributing sound over the power lines to each speaker/subwoofer. AUDIO Cu’s proprietary technology provides sound-effect control to up to ten (10) different speaker channels per system in any configuration from 2.1 to 9.1. AUDIO Cu’s TX utilizes the HDMI eARC/ARC output from the TV, decodes the sound, and moves the audio data through the power lines to each speaker/subwoofer AUDIO Cu receiver (RX) unit. From the judges: “Very innovative product. It eliminates the pain point of location limitation due to architecture issues. If the claimed ability to detect noise on the powerlines from other devices proves out, it will have its place in commercial installs with wiring challenges and where Bluetooth and Wi-Fi supply insufficient channel count.”
G&D PersonalWorkplaceController GEN5
With this multiviewer, users can simultaneously display between 9 and 27 unique computer and digital video sources up to 4K60 resolution, plus up to five streaming sources in the RTSP, WebRTC, and NDI formats over unlimited video layouts. All sources can be easily configured and recalled by the operators themselves without the need for complex programming. Operators can display multiviewer images across up to four unique 5K/60 individual workstation monitors. It can also be combined for video wall applications up to 16K resolutions, or a mix of video wall displays and individual workstation monitors. The product also supports swap and dynamic modes, providing operators with an easy method to interact with the placement of sources across the displays. The PersonalWorkplace-Controller can operate stand-alone or as part of an integrated system. It’s available in 7 variants with different I/O counts but also in variants with keyboard-mouse operation, without keyboard-mouse operation, or optional input modules for HDMI, DisplayPort, and SDI via fiber optic cable extensions into the unit. From the judges: “The speed and latency marks are very impressive.”
Matrox Mura Distributed Video Wall Processor
This is a fully IP-based 4K video solution that enables multiple processor units to be combined in various arrangements for a synchronized H.264/H.265 4:4:4 video surface of any size. With the processor’s unique IP-based framelock capability, based on the Precision Time Protocol (PTP), synchronization can move video signals over a single network cable. The distributed video wall processor is built on the proven Matrox Mura APIs. Creating and configuring the distributed video wall is further simplified through the new web-based configuration tool, which enables users to set up a video wall on any device, from any location. MuraControl, Matrox Video’s cost-effective video wall management software eliminates the need for a dedicated server. Rather, one of the deployed nodes is “elected” to act as server and offer the Matrox Mura API to third-party applications. From the judges: “Very well thought out ecosystem for fully IP distributed video walls and IPMX ready.”
PureLink iCON-T10
This ten-inch tabletop all-in-one touchscreen controller introduces the industry’s first human-readable programming syntax via the world’s easiest programming language, EZ. It is also the first controller to feature a complete line of touch panels and keypads with integrated and expandable control capabilities, allowing it to function as a stand-alone control system across a wide range of applications. For systems requiring additional I/O, the T10 offers expansion modules that can be placed anywhere on the network. It can serve as both a standalone controller/user interface or as a user interface for the C-8 Master Controller. From the judges: “Programming has always been the bane of the integrator’s existence. Something simple, easy to program and roll out, and not hideous to the eye is almost a unicorn. In the PureLink ecosystem this device should shine.”
Roland V-80HD
This compact portable hybrid event switcher has diverse video connectivity, advanced automation features, and SRT support. The companion Roland Graphics Presenter software provides an easy-to-use solution for creating professional titles and motion graphics for live productions with the V-80HD. Additional Roland video switcher models will receive Roland Graphics Presenter and SRT support with free system updates coming later in 2024. The IO includes eight inputs for 3G SDI, HDMI, and SRT video sources and seven outputs that support 3G SDI, HDMI, USB 3.0, and LAN (RTMP/SRT) connections. The V-80HD also provides integrated control for PTZ cameras from various manufacturers, plus remote operation and video monitoring via a dedicated iPad app and computer control software for macOS and Windows. There are workflow tools and the new Roland Graphics Presenter software for Windows included. From the judges: “Very clean, easy to read even in dark environments. Very intuitive buttons and interface.”
Shure WL18Xm Lavalier Condenser Microphones
This new low-profile WL18Xm professional lavalier condenser microphone series includes the cardioid WL185m, supercardioid WL184m, and omnidirectional WL183m, for use with compatible wireless bodypack transmitters. The new microphones build on the legacy of existing Shure WL lavalier microphone technology. They are 8mm shorter than their predecessors creating a better weight balance for staying in place; an innovative tie clip can be rotated in 90-degree intervals for accurate positioning. Users can select LEMO or TA4F connector options. The new microphones take advantage of advances in wireless technology for lower self-noise, improved RF immunity, higher dynamic range, and improved max SPL. From the judges: “Of course you can count on the audio performance but what set this product apart is the mechanical design and ergonomics which should improve capture and user experience.”
Snap One WattBox 820 Series IP enabled PDUs
This brings the proven performance of the 800 series WattBox PDUs to a 20- amp lineup. The new PDUs come in 2-, 8- and 12-outlet models and feature individual outlet metering, surge protection, and power conditioning. The 8-outlet solution allows users to monitor voltage and internet connectivity on the front display and use local buttons for preprogrammed resets. Each PDU is managed and controlled via OvrC enabling remote monitoring, self-healing, and remote management. The 820 Series WattBox offers surge protection and automatically disconnects during unsafe voltage conditions. OvrC enables configuration, deployment, and remote monitoring and management. OvrC continuously monitors and automatically reboots if needed. The OvrC Connect app supports control and reset for one or multiple devices with the click of a button. From the judges: “Green systems require power control, and this line of PDUs gives the end user a massive amount of control and data. The ability to remotely restart a device and receive notifications is a major plus.”
Symetrix xIO USB Endpoint
The new quarter-rack xIO USB endpoint from Symetrix supports educational, justice, conferencing, and other applications that utilize desktops, laptops, or attendee-supplied devices (BYOD). The device features front and rear USB-C connectors, two channels of transmit/ receive over USB, and two channels of transmit and receive using the Dante AVoIP protocol. Importantly, the device includes synchronization with human interface devices (HID) to maximize integration with Symetrix control devices. A new Intelligent Module accompanies the xIO USB to control USB port operation, audio gain, mute, audio metering, and HID. Sample rates of 44.1, 48, 88.2, and 96 kHz USB-C with SRC are supported as are 48 kHz and 96 kHz when using Dante network protocols. Both DC power and PoE are supported, as is vertical or horizontal orientation. From the judges “With USB-C becoming a more relevant format in the AV world, the box becomes a helpful tool in extending USB-C and BYOD capabilities, especially with the PoE option.”
Theory Professional ic6 Bollard Landscape Speaker
The ic6 utilizes computer-optimized tuned ports to claim exceptional low-frequency bandwidth, punch, and resolution, with a maximum output of 112dB via polymer compression drivers and 6-inch carbon fiber woofer. It can be installed in outdoor/ high humidity environments when paired with the optional all-weather ic6 grille. It can also be used as a pendant speaker. It can be quickly installed into the optional ic6 indoor or (coming soon!) all-weather pendant housing to instantly convert the ceiling speaker to a pendant-style hanging loudspeaker. Now, as of InfoComm 2024, the ic6 takes another form factor; when integrated into Theory’s Dark Chocolate stainless steel and paintable ic6 Bollard housing, the ic6 becomes a full-range 360-degree landscape speaker. For large, distributed installs, hundreds of ic6 Bollard speakers can be integrated. From the judges: “Great sound, awesome coverage, and aesthetically pleasing. The multi-tap transformer also opens the door to a variety of use cases.”
Vizrt Viz Connect Tetra
This ultra-compact live production workstation enables remote multichannel 4K video and audio production with a simple internet or network connection, anywhere in the world. Viz Connect Tetra’s I/O channels can be used as up to 12G NDI to SDI, 12G SDI to NDI, or even NDI to NDI – at home in a server room rack as it is on a desk, on location, wherever connection is needed. Built-in white balance and color correction allow quality adjustments directly at the point of conversion. For audio, it supports NDI, SDI, ASIO, and WDM virtual SoundCards. Each of the four IO channels supports 16×16 audio routing for patching on the go. With simpler access to the cloud with NDI 6, Tetra features access to NDI Bridge, which means it can integrate bi-directional video and audio feeds from different locations into a single NDI or SDI live production environment. Compatible with Tricaster and supports secure encryption. From the judges: “With the ability to manage NDI and SDI sources this product overcomes some of the hurdles experienced in cloud production with minimal latency (1-1.5 frames). Small form factor is a huge plus, as well as the ability to connect to 3rd party gear.”
WyreStorm Technologies MX-1007-HYB
This hybrid 10×7 plug-and-play matrix/IP switcher puts control in the hands of educators at the podium, in the classroom, or in labs. With dedicated inputs for a laptop, microphone, Dante audio, and document camera, different teachers can manage and integrate diverse multimedia sources in any classroom. The multi-format video connections including USB-C, HDMI, HDBaseT, and new AV over IP capabilities for integration with WyreStorm’s NetworkHD join built-in DSP including Dante 4×4, mic inputs, balanced audio outputs, and 4-channel amplifiers for up to 4 speaker outputs. Its hybrid nature combines the reliability of traditional matrix systems with the flexibility of IP-based distribution, plus it supports Cloud Management compatibility, HDBaseT3 uncompressed AV extension, and NetworkHD AV over IP. From the judges: “A very versatile product that fits an important niche and a great price point for a true seamless switcher. Quality and variety of i/o make it a very good effective product for numerous markets, but its flexibility makes it very nice for the higher ed market.”
INOGENI TOGGLE ROOMS XT
The new Canadian-made TOGGLE ROOMS XT switches six peripherals between two hub hosts over a single USB-C cable, envisioned for 4K60 Pro AV systems and unified communications including applications including BYOD/BYOM. Users can automatically or manually switch up to five USB devices and one display between a Room PC and laptop hosts. It has a reach of 40 meters / 132 feet at 4K60 from Room PCs and 70 meters /230 feet at 1080p, along with a 20-foot diameter for USB laptop connections. Users can manage their meeting environments with controllable switching options via RS-232, IP control, and GPI/relay control, and via the accompanying Maestro software. It’s tested and compatible by design with major UC systems and camera manufacturers, such as Crestron, Logitech, Lenovo, Poly, AIRTAME, Barco-ClickShare, MAXHUB, Jabra, Teams, Zoom, etc. From the judges: “A USB-C AV/ IT toolkit that seems like it would slot right in to provide relatable switching among USB devices, especially in a UC application.”
Audio-Technica System 20 Pro
This new self-managing, plug-and-play 2.4 GHz digital wireless system is scalable to 20 channels and overcomes many challenges of conventional wireless microphones. Capable of receiving up to four transmitters, the system’s ATW-R1440 receiver can remain docked in the half-rack chassis or be mounted up to 328 feet away and connected via Ethernet-standard cabling. Up to five chassis can be linked using included RJ12 cables. Users can choose Standard mode (10 channels) to minimize latency or HD mode (20 channels) to maximize channel count for the 24- bit/48 kHz system. The dual antenna transmitters are available in body pack and handheld microphone. There are also two transmitter options for conference applications, a boundary microphone transmitter with a cardioid polar pattern and a desk stand transmitter with XLR gooseneck microphone connectivity. Both feature selectable mute operation, variable mode LEDs and OLED display, and a USB Type-C charging connection. Received audio can be submixed within each receiver. From the judges “Given the popularity of the System 10, this opens up 2.4 GHz wireless microphone systems to more applications with all the heavy lifting of setup and frequency coordination made simpler.”
Clear-Com Gen-IC
This cloud virtual intercom system is designed to integrate with existing hardware ecosystems or function as a standalone software solution. Its scalability allows users to easily add virtual clients, with the option to integrate with ClearCom’s hardware infrastructure over LAN, WAN, and the Internet. Clear-Com has addressed latency with a unique application that can be deployed on selectable regional targets, and Gen-IC Virtual Intercom instances can be linked globally. It integrates with Clear-Com’s Agent-IC mobile app and Station-IC virtual desktop client. Integration with hardware ecosystems is achieved through Clear-Com’s LQ Series of IP Interfaces. From the judges: “The limitation of belt packs and physical cabling are a real problem in production settings, stadiums, and live events. The ability to add up to 300 + people to one setup was impressive. The latency issues seem to be mitigated and the flexibility of communication to one or many was excellent.”
Ross Video Quorum
This mark-based production system is designed to transform how organizations manage their meetings, assemblies, committees, and presentations, with an easy web interface that allows for professional-grade capture and documentation of meetings and turns them into a resource for future reference. The mark-based method utilizes predefined fixed positions within a meeting space—such as around a table or lecterns—enabling cameras to automatically move to the best angles based on these marks. A wide range of conference microphones are supported. Quorum’s integration with the Ross XPression graphics system allows users to create and integrate graphics for more visually appealing meeting productions. From the judge: “An entirely new take on meeting production with a focus on production values and treating meetings as assets. An expansive feature set and well-designed UI.”
Blackmagic Replay
Blackmagic Replay is a unique new way of creating live-action replays, using multiple HyperDecks to record into shared storage. DaVinci Resolve is connected to the same shared storage as a powerful playback engine that also functions as an editor with multi-user collaboration features, color correction, visual effects, and audio postproduction. Replays can be converted into promos, title sequences, and instant social media updates. Users can customize as many channels as they need, and build a replay system in HD, Ultra HD, or even 8K. More than one DaVinci Resolve system can be added for collaborating globally using Blackmagic Cloud shared projects. Anything done on one system will automatically update on the others. ATEM switchers with builtin ISO recording features can also be used to do simple replay because all the hardware is built in. From the judges: “It’s a game changer for editing and production. It’s time-saving and has a robust feature set.”
Panasonic Connect ET-FMP50 Series Media Processor
This media processor is a tool for immersive multi-projection attractions. The compact processor handles camera-based warping, blending adjustment, and 4K media playback capability, making installation for these types of attractions more efficient and operation more streamlined. The ET-FMP50’s storage supports continuous playback and allows teams to set schedules for automatic playback, which reduces downtime and coordination time for on-site teams. Multiple media processors can be used to synchronize content playback, creating a coordinated and seamless projection mapping experience of any scale. From the judges: “Really liked the automatic configuration capabilities to cut down on installation time. Paired with a third-party camera, this system can view the display canvas and automatically configure edge blends, brightness, and color correction. I can only see this getting better as the product gets a larger data set to improve its accuracy in auto configuration.”
Ophit OMB-HM
Ophit’s OMB-HM is a fiber optic extender that supports 8K UHD (7680 x 4320) signals for long-distance transmission up to 100m (330ft) for HDMI 2.1 over 8-core MPOconnected multimode fiber. This is no signal degradation. The extenders are designed for digital signage, media broadcasting, video conferencing, large venue auditoriums, mission-critical control rooms, and medical video integration in operating room applications. The OMB-HM provides simple plug-and-play installation and electromagnetic interference (EMI) protection. From the judges: “This fiber extender serves that important need for uncompressed and uncompromised signal and delivers on what is expected. Not a lot of products out there that do this well, but this is one of them.”
MAXHUB 92 21:9 UW Touch Series
As the newest addition to MAXHUB’s UW (Ultra-Wide) series, the 92-inch UW92NA ultra-wide 5K display is ideal for businesses that need to display detailed information or graphics to clients. The new UW92NA facilitates external control via IP or Serial protocols, including certification by Q-SYS, Extron, AMX, and others. The UW92NA display supports MAXHUB Pivot Device Management. It is designed to accommodate 24/7 operation in either landscape or portrait mode. This allows it to display content around the clock, providing accurate information to clients or customers at all hours, even outside of regular business hours. The UW92NA also supports the Open Pluggable Specification (OPS) and includes OPS slots for connecting external devices to the display. This can be used for upgrading to a Windows-based display. From the judges: “Crisp-looking display with many features including remote management, OPS, and integration/certification with several leading control system vendors. Both a digital signage display and a Teams/web conferencing display.”
Optoma ZK810TST
As part of Optoma’s 4K UHD fixed lens projector series, it has a 0.65:1 – 0.75:1 short throw ratio and 8,5000 lumens, claiming the position as a first-of-itskind and the only 4K UHD fixed lens short throw projector on the market with over 7,500 lumens of brightness. It has a 3,000,000:1 contrast ratio, flexible installation features for landscape or portrait, and a fixed, 4K telecentric lens design with full motorized lens shift and focus. It can project an image size up to 300 inches just over 14 ft. away from the screen in any room. It supports HDR and HLG and 3D content from almost any 3D source, including 3D-compatible graphics cards, 3D broadcasting, and the latest generation 3D media servers. The eco-friendly chassis design is made with up to 50% PCR (Post-Consumer Recycled) plastics. From the judges: “Super high res and nice performance.” “I also like their emphasis on making use of recycled plastics.”
Samsung SmartThings Pro
Samsung’s SmartThings Pro enables convenient management by linking various IoT products such as lighting, temperature and humidity control, and cameras. The platform and app support multiple connectivity options, including Zigbee, Bluetooth, Wi-Fi, Thread, and Matter, ensuring exceptional device compatibility. To support a pro version of Smart Things, Samsung expanded its Enterprise API to allow for customized solutions optimized for various scenarios or dashboards. SmartThings Pro is locally processed and designed with robust security and energy management. The SmartThings network is reportedly over 285 million users and 128 million IoT devices, including more than 3,000 supported devices from 300+ partner brands. From the judges: “I love this concept – anything that lowers the bar and enables integration of IoT devices, especially in the commercial AV world, gets my vote.” “We see this more and more in our homes so why not our commercial spaces?”
Absen Saturn Series
This ultra-light, ultra-fine pixel pitch, HDR10+-compatible series was designed with up to 1500nits brightness, 16-bit grayscale, a 1/8 scan ratio, and a 7680Hz refresh rate for settings where detail and clarity matter. A front-serviceable design and innovative quicklock system aid in maintenance and installation. The series is energy efficient and supported with extensive IO. Available in flat, curved, and ceiling form factors, its lightweight design and flexibility make it ideal for rental & staging installations. Each SA panel weighs only 19 kg and can be mounted at heights of up to 10 meters for hanging installations and up to 5 meters for stacking installations. From the judges: “A solid dvLED fine pitch rental product with nice image quality.”
NUITEQ NEXT Hub
This sleek, simple video conferencing and presentation system comprises the all-new NEXT Hub, the 3-in-1 Microphone System, and the Clear Touch HC200 Camera. The NEXT’s audio performance is supported by 2×10W dual-channel highpower speakers. It incorporates noise reduction, echo cancellation, reverberation resistance, and a built-in AGC algorithm. The built-in 6-array microphone has a 32kHz sampling rate, offering a pickup range of up to 8 meters. The integrated camera has a 120-degree field of view at 4K. From the judges: This opens the door to extend the life of existing displays while adding valuable features. The ability to update the user experience of older displays with a simple camera upgrade makes upgrade paths extremely easy for integrators.”
Just Add Power MC-TX3
Just Add Power’s MC-TX3 MaxColor 4K60 Series Transmitter natively supports 4K60 12-bit 4:4:4 in and out over Cat5/Cat6 cable. It allows end-users to play Ultra HD video from 4K sources and devices but also gives them compatibility for AES67 audio systems, plus HDMI loopout. In addition, the transmitter supports MPEG downstreaming for connected devices, such as a laptop or tablet. This provides compatibility for AES67 audio systems with any Just Add Power AV distribution system as well as input for LPCM audio up to eight channels, AES67 audio send /receive up to eight channels, and AES67 audio injection into any Just Add Power network. Like many other transmitters in the Just Add Power lineup, it includes HDMI pass-through; control of endpoints via RS-232, IR, and CEC; and Image Pull, which will preview an image from any source or display in any web browser or control system in up to 10 fps. From the judges: “MaxColor lineup continues to stand out as one of the most well-built product lines on the show floor. AES67, MPEG downstreaming and a 5-year warranty really push the MC-TX3 MaxColor line to the top of its class.”
Atlona AT-OMECS31-SA-HDBT
This three-input HDBaseT and HDMI switcher, mixer amplifier, and USB Hub is an Omega Series AV presentation and UC collaboration system featuring AV switching for local and remote sources, USB routing, audio mixing, amplification, and control. It includes 3×1 switching between one HDBaseT input, two HDMI inputs, and one HDMI output. The HDBaseT input supports extension of video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). The HDMI inputs support 4K HDR and 4K/60 4:4:4. A four-port USB hub connects cameras, speakerphones, interactive displays, and other devices as well the ability to switch them between remote and local host devices. It has three line inputs for audio, an onboard mixer, integrated amplifier, plus audio features including ducking, PA mute, and assistive listening line out. Also available: AT-OME-CS31-SA with 3 HDMI inputs and AT-OME-CS31-SA-C with 2 HDMI inputs and 1 USB-C input. From the judges: “My favorite collaboration solution on the show floor for online and small presentation spaces.” “The chassis is packed with all the essential connectivity and eliminates the need for additional hardware in many environments.”
This patented and ingenious 4” square (720×720) desktop touch/control panel combines a beamforming Dante microphone, microphone, and 4K AV over IP. It has a 2.0GHz processor, 800MHz audio DSP, noise cancellation, feedback suppression and auto gain, ReAX Control Engine, and 1Gbps 4K60 AV over IP VPX Transmitter. IO includes one USB-C and one Mini HDMI connector, one USB-C 100-Watt pass-through power port, one USB-C display output, and 3.5mm headphone out and speaker. It offers server-side JavaScript, there are front and rear RGB LED indicators, ambient light and proximity, 1G, LAN PoE+, and it supports Bluetooth LE. From the judges: “My favorite touch panel experience at the show this year.” “From an integrator perspective, limiting the real estate required for a touch panel can really open up the user experience in the built space, while not sacrificing the capabilities of the hardware that is positioned closest to the user.”
AMX SVSI N3300 Series
These encoders and decoders offer 4K60 H.26x and Dante AV-H streaming. Hybrid learning applications will especially benefit from the significant cost savings of simultaneous dual-stream encoding and local recording to an external USB 3.0 drive. Video preview images are viewable from the built-in web interface or from a touch panel; enhanced support for high-security networks is built in. N3300 Encoders simultaneously output up to 4K60 H.26x or Dante AV-H on the primary stream and a high-compatibility H.26x secondary video stream. With Dante AV-H, N3300 products are compatible with Dante Studio, a suite of PC software tools for PC, that support ingest, recording, production, or streaming applications without the need for additional hardware. Dante Controller handles all device routing, naming, and configuration, while Dante Domain Manager provides IT-level management. From the judges: “One of the best features is the ability to record locally to a USB 3.0 drive. As for configuration it is nice to see Dante Studio, Dante Controller, and the built-in web user interface all as options to build out your systems.”
AMX Muse Controllers
AMX MUSE Automation Controllers provide a dedicated computing resource to run HARMAN Professional’s MUSE automation platform in any AV environment. They can simultaneously process a virtually unlimited number of scripts written in JavaScript, Python, or Groovy and natively support Low-Code development with Node-RED. AMX MUSE Automation Controllers feature a modern embedded processor that’s 10x faster than the processor in AMX NX Controllers, substantial memory, and industrial-grade eMMC storage. Built on HARMAN’s secure Linux platform, MUSE controllers are designed to surpass the requirements of the most secure installations. Additionally, these Controllers natively support HARMAN’s HControl (open-API), HiQnet (legacy HARMAN audio devices), and ICSP (legacy AMX control devices) protocols. From the judges: “These controllers pack a punch combining a small form factor without sacrificing power due to the upgraded processor and multiple flavors of I/O. Having consistent programming strings across multiple languages shows how much thought AMX put into their updated product line.”
BSS Soundweb Omni
Soundweb OMNI was designed to deliver the most comprehensive open-architecture DSP solution for installed sound. It features the most powerful processor ever from BSS, adaptable to the diverse needs of hospitality, large venues, corporate, education, and government installations. The Soundweb OMNI family combines enterprisegrade processors, flexible I/O expanders, Dante/AES67 networked audio, an onboard scripting engine developed by AMX, and a large library of processing objects, including media playback, AEC, VoIP, and more. The platform is managed through AVX Architect and AVX Control, an all-new software suite, built from the ground up to support the latest installed products from HARMAN Professional starting with BSS Soundweb OMNI, ushering in a new era of installed AV software at HARMAN. It introduces HControl, a human-readable, standards-based, and developer-friendly API, and supports both 48kHz and 96kHz processing. Soundweb OMNI features two flagship processing devices, the 512p and 256p, which deliver high Dante/AES67 channel counts, up to 512×512 at 96kHz. Soundweb OMNI also offers two I/O expansion devices, the 32e and 16e; each I/O port is “format configurable” as either analog or stereo AES3 digital. Furthermore, certain audio I/O ports and all GPIO ports are “direction configurable” as either inputs or outputs.
JBL Venue Synthesis
This 3D Acoustic Simulation Software makes it easy for live sound engineers to design and optimize even the most complex JBL sound reinforcement systems for any environment, at any scale, and validate equipment for rigging. It offers both 2D and 3D visualization of real-time, holistic JBL system acoustic coverage and equipment mechanical validation for rigging safety. Users can create or import 3D venue models, interact with realistic 3D models of JBL Professional loudspeakers and accessories, and predict coverage on any audience or architectural plane for a full system of JBL products. Venue Mode integrates with common geometry file formats and plug-ins such as SketchUp, AutoCAD DFX, and EASE and CATT-Acoustics models or can build venues from scratch when 3D models are not available. A proprietary high-resolution loudspeaker data format measures frequency resolution at 1/12th octave—far finer than the industry standard of 1/3rd octave—and high-resolution balloon data for high-frequency channels is just 2 degrees (the industry standard is 5 degrees), for precise line array performance prediction. The software can be used to organize and link loudspeakers and arrays, visualize coverage, angles, delay, and much more. The ArrayLink app has also been updated to better support Venue Synthesis. From the judges: “JBL VS balances power, precision, and simplicity a rare feat when it comes to software in the Pro AV market.”
Martin Exterior Wash Pro
The Exterior Wash Pro family joins the recently released Exterior Linear Pro fixtures for professional architectural illumination in permanent outdoor installations. The Exterior Wash Pro family is available in two color variants, QUAD and CTC, and comes in four sizes per variant. Key features include externally mounted micro lenses and optional baffle snoot to offer customizable beam control even during late-stage design. A narrow beam angle makes these fixtures ideal for long-throw applications. Setup is simplified with an integrated magnetic sensor for fixture checks, offering easy verification of power, DMX, and basic color tests. Focusing is accomplished without the need for an external controller and users can tailor cable lengths, including hybrid cable options. From the judges: “I appreciate that Martin has delivered a line with a similar form at different scales to meet the need of an architectural space without exceeding the needs. The product has clean lines that can be concealed easily but also can be mounted exposed without taking away from the building aesthetic.”
