Woodland Park, NJ – May 24, 2022 – FSR is not tooling around! The manufacture is dead serious about bringing cost-effective, reliable and effective tools to InfoComm 2022 that will simplify and shorten installation timelines, support the industry’s latest peripheral devices with power choices, and split, switch and carry a digital source. All these new innovations will be ready for visitors to evaluate and test at InfoComm 2022 in the LVCC’s new West Hall, Booth # W1415.
Hinged U-Access Cover: FSR is not tooling around
FSR’s “Tool-less” U-Access cover now features a hinged design for the Company’s FL-200, FL-400 and FL-500 floor boxes, allowing for smooth entry into the units. The hinge provides smooth operation while the U-Access handle makes accessing connections a breeze. No more tooling around with hard to open floor box covers.
CB-MLS Ceiling Boxes with Pre-wired MLS: Skip the trip to the job site
The CB-MLS eliminates coordinating visits to the job site to connect power to a FSR ceiling box. With the MLS pre-wired ceiling boxes, the electrical contractor can install and power the MLS starter cable at any time during the initial construction phase. Technicians can install the ceiling box and plug into the MLS system and provide power after the AV contractor completes hanging the unit eliminating the need for multiple trips to the site.
3.1 Gen 2 Digital Ribbon USB Type-C Cables: High-end performance from plug-and-play experience
FSR’s brand-new 3.1 Gen 2 USB Type-C cables support 10 Gbps data rate and are designed for today’s high-end peripheral devices that use a USB Type-C connector to transfer data. The USB Type-C cables have an enhanced pull strength of 15kg/33lbs. These cables deliver superior performance while providing a reliable plug-and-play user experience.
T6-AC2CH-CC Charger Bracket: Power that divides and conquers
The T6-AC2CH-CC is a USB Type-A and Type-C internal charger bracket designed to contain AC power plus a USB Type-A and Type-C Charger. Each USB charging port incorporates integrated power management circuitry to determine the delivery requirements for the connected devices. The built-in electronics directs the available power to a single port or divides the power to provide the fastest charging based on the available power. This bracket can be installed in FSR’s CT6 and RT6 table boxes.
DV-HDA4k-12AUD, 1×2 HDMI DA: One source to two displays
The DV-HDA4k-12AUD 1×2 HDMI 2.0 Splitter simultaneously routes one HDMI® source to two HDMI® displays, supporting resolutions up to 4K2K@60Hz (4:4:4) and HDCP 2.2. This product also supports audio extraction from an HDMI source as optical and analog audio with output support for bypass and downscaling (4K->1080P).
DV-HSW4K-41AUD, 4×1 HDMI Switcher: Slim, simplified and supportive
FSR’s new DV-HSW4K-41AUD is an ultrathin auto switcher with four HDMI® video inputs and one HDMI® output. This switcher supports HDMI® video resolution up to 4K@60Hz 4:4:4 HDR and multichannel audio. In addition to passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. The switcher will de-embed digital stereo audio to provide an audio source for an audio system. The unit also supports audio return channel (ARC) for transmitting audio back to HDMI input port from the connected display.
HD-H704K-WP 70 Meter Wall Plate to Brick Extender: Goes the distance
The HD-H704K-WP 18G HDMI® Extender consists of a single gang wall plate transmitter and a small thin brick receiver. The extender adopts PoC technology to extend 4K@60Hz 4:4:4 HDMI® video to distances up to 40 meters (131 feet) and 1080p@60Hz video to distances up to 70 meters (230 feet) over a single CATx cable. It supports bi-directional RS232 and IR pass-through to control source or display devices remotely. It also supports CEC pass-through. HDBaseTTM (PoC) feature allows the transmitter to be powered by the receiver over the CATx cable.
FSR is a leading manufacturer of a wide variety of products for the Pro AV and Information and Communications Technologies (ICT) markets. FSR manufactures its audio and video switching, control products, connectivity boxes and collaboration systems from headquarters in Woodland Park, NJ.