Company to Present MaxColor™ 4K60 Series, AMP Software, 2GΩ/3G ST1 Sound Transceiver, and Warp Engine; Highlight Integration With Aveo and Enado Control Platforms and Luxul Managed Gigabit Switches
SEMINOLE, Fla. — Sept. 30, 2021 — Just Add Power, a leader in AV-over-IP distribution, today announced its technology lineup for InfoComm 2021, taking place Oct. 27-29 at the Orange County Convention Center in Orlando, Florida. In booth 2733, the company will unveil its new MaxColor™ 4K60 transmitter and receiver series and Advanced Matrix Programmer (AMP) software for multicast switching systems. In addition, Just Add Power will highlight its award-winning 2GΩ/3G ST1 Sound Transceiver, Warp Engine, and partnerships with Aveo Systems, Enado, and Luxul.
“We couldn’t be more excited to finally return to the show floor in Florida, and we’re marking the occasion with the introduction of a range of new capabilities for Just Add Power systems that our customers have been asking for,” said Taft Stricklin, sales team manager at Just Add Power. “From the debut of native 4K60 support and new programming software to flexible audio and video wall capabilities and integration partnerships, it’s going to be an event to remember in our booth. We can’t wait to see you there.”
Showing for the first time at InfoComm 2021, Just Add Power’s MaxColor 4K60 transmitter and receiver series natively supports 4K60 in and out, allowing end users to play 4K Ultra HD video from the growing number of 4K sources and devices. With MaxColor, 4K 12-bit video can be distributed over existing Cat 5/Cat 6 cable, eliminating the expense of upgrading to fiber and buying costly network switches. In addition, the series supports MPEG downstreaming for connected devices, such as a laptop or a mobile device. MaxColor features instant seamless switching, 4K up- and downscaling, all audio formats, seamless HDR management, and Dolby Vision for the best viewing experience.
Also making its debut will be Just Add Power’s new AMP software for environments with existing infrastructure or special network requirements that don’t allow for a dedicated AV distribution switch. AMP consolidates and streamlines the process of setting up individual Just Add Power devices — discovering them on the local network, presenting them in a list, and allowing installers to name them, configure their IP addresses, and assign channels to transmitters — while assisting with updates when new firmware is released. Once the Just Add Power system is configured, AMP provides a user interface to control source switching.
Just Add Power’s 2GΩ/3G ST1 Sound Transceiver is an audio-only component that functions as either an input or output. With the ST1, integrators can easily add a stereo audio source to any Just Add Power system or extract stereo audio from an existing transmitter. As an audio input, the ST1 feeds stereo audio into a Just Add Power system, allowing any audio source with an analog audio out to be connected and played on any receiver. As an audio output, the transceiver can play any stereo audio content from any Just Add Power device while providing variable audio control.
With the Warp Engine, installers can rotate any HDMI source — cable boxes, media players, game systems, cameras, and more — in a Just Add Power matrix in 0.1-degree increments in real time for incredibly low latency. The rotated image can then be sent to an unlimited number of receivers in the network, allowing for the creation of massive artistic video walls using a single Warp Engine. Fully HDCP-2.2-compliant, the unit can be added to any Just Add Power 3G or 2G/3G system running Just OS.
At InfoComm 2021, Just Add Power will also discuss how integration with Aveo Systems’ Mira Connect control system simplifies setup for integrators while providing users with intuitive control via a touch-screen controller or their own personal devices. In addition, integration with Enado’s V5 controller software delivers contactless control over a Just Add Power system on personal devices — while offering online programming capabilities to integrators — by simply scanning a QR code. Finally, a new driver allows integrators to easily incorporate Luxul’s SW-510-48P-F, SW-610-24P-R, and SW-610-48P-F managed L2/L3 Gigabit switches into Just Add Power systems requiring a single switch.
More information on Just Add Power and its products is available at www.justaddpower.com.
# # #
About Just Add Power
Founded in 1992 by three employees of IBM who were happy to shed their dark suits and red ties, Just Add Power is dedicated to doing tech a little bit differently. Instead of being consigned to the dustbin by planned obsolescence, the company’s high-quality AV-over-IP distribution solutions increase in value over time. By offering new devices that are compatible with previous systems and providing free firmware updates when innovations break, Just Add Power respects our end users’ investment in their systems. This makes it easy for dealers to engage customers for years of system improvement, while the reliability of the video keeps them coming back for more. Just Add Power is committed to making systems easy to install and easy to use, and our industry-renowned training sessions and technical support team give installers all of the skills and information they need. Whether it’s an unlimited matrix of sources and screens, a video wall, or an architectural installation, our revolutionary design philosophy makes it simple to create an AV system that rocks. www.justaddpower.com
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
Link to Photos:
Just Add Power MaxColor Transmitter: www.ingearpr.com/JustAddPower/J+P_MaxColorTX.png
Just Add Power MaxColor Receiver: www.ingearpr.com/JustAddPower/J+P_MaxColorRX.png
Just Add Power ST1 Transceiver: www.ingearpr.com/JustAddPower/J+P_ST1.png
Just Add Power Warp Engine: www.ingearpr.com/J+P/J+P_WarpEngine.png
Follow Just Add Power: