Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Key Digital Introduces the KD-X444LP 4K HDMI Extender Set

— The KD-X444LP HDMI allows signal and device control extension up to 70 meters —

MOUNT VERNON, NY – Key Digital, an award-winning developer and manufacturer of leading-edge digital video processing and video signal distribution solutions, introduces its new KD-X444LP HDMI CAT5e/6 extender set – a 4K 18G transmitter/receiver pair featuring Power over CAT (PoC) with bi-directional IR and RS-232 control extension. The single CAT6 extension, with fully automatic, cable length dependent equalization and amplification, has a range of up to 70 meters (230 feet).

The low-profile, slim-chassis KD-X444LP supports video resolutions up to 4096×2160/60 Hz at full 4:4:4 sampling through Key Digital’s proprietary UHDoTP (Ultra High Definition over Twisted Pair) protocol. The extender set provides uncompressed 10.2 Gbps signal extension with visually lossless compression applied to video formats exceeding 10.2 Gbps up to 18 Gbps. The provided power supply can be flexibly connected at either of the Tx or Rx units, with the second unit receiving PoC – only one power supply is needed.

An expansive list of content standards is supported by the KD-X444LP, including the HDCP 2.2 anti-piracy protocol; the HDR10 standard for high-dynamic-range video; and EDID management for display recognition. It also offers deep color support up to UHD/4K 30Hz 4:4:4/12-bit or 60Hz 4:4:4/8-bit. A full buffer system manages HDCP authentication, EDID control handshakes and TMDS re-clocking / signal re-generation for serial data optimization. Hot Plug Detection Control can force a display to see a partner device as always connected and active to help overcome installation obstacles in cases where multiple connectivity layers or use with non-standard devices results in a “no source connected” error.

Dolby and DTS surround formats up to 6.1 channels are supported alongside video extension, while the KD-X444LP Tx unit’s HDMI pass-thru output supports Dolby, Dolby TrueHD, DTS and DTS-HD surround formats up to 7.1 channels.

For shorter extensions of 50m (164ft) or less, and where 7.1 HD audio or HDMI pass thru is not required, Key Digital offers its otherwise identically capable KD-X444SP extender set.

The Key Digital KD-X444LP HDMI extender set is available to ship from stock at an MSRP of $499. (USD) as is the KD-X444SP at an MSRP of $315. (USD).

For more information:
KD-X444LP HDMI Extender Set
KD-X444SP HDMI Extender Set
Key Digital

Featured Articles

Close